Help Please. No movement at all, status light not lit

I’ve got the Rambo 1.4 board wired up with all the stepper motors connected and I can’t seem to move anything via software or the LCD. After some time the LCD says Printer Halted Please Restart. Do I need a power supply plugged into port C for “motors” in addition to having the main power supply connected to B? According to the schematics on the 1.4, port B is for “Logic, Heater and Fans,” and that is what I’m hooked up to. Port C is for “Motors.” Heres a picture of how I have it all wired up.

I’m a noob, sorry if I’m missing something obvious.

Your power connection is not right, take a look at V1 Doc page. You need power on first 2 pairs of conectors
https://docs.v1engineering.com/electronics/ultimachine/#rambo-13-14

Hope this helps

Gustavo

4 Likes

Thank you so much! I’ll add a jumper.

2 Likes