I am selling all of the 3D printed parts and the wooden flat parts for the Lowrider 2. They are good quality and have been in use on my machine for around 6 months.
Printed parts fit the 25mm delta coduit from screwfix.
The flat parts are plywood not mdf and there is a spare “611 plate” undrilled.
Only selling as I’m going to build the MPCNC instead.
Printed and flat parts only, no hardware or anything else.
I am doing mine in Red Pla from Hatchbox at the moment. I found that I can get nice parts with .8 nozzle and 1.0 nozzle. I am running my printers at 25mm/s, 2mm walls and .3mm layer height. I have really nice pieces being made. I found a while ago that the super fine layer heights are nice for D&D figures but these kind of parts not really necessary.
Printed parts are all PLA from 3dprintz (UK Brand), 0.4mm nozzle, .2mm layers, 3 or 4 walls/top/bottom depending on the part, and 50% infill or 100% on the smaller parts. I’d have to get back to you on postage because the machine is till built and i’ll need to dismantle it to get a postage weight.