I plan on posting all my cnc projects here.
The thing I made today is a Julius Caesar pen holder bust (thingiverse link).
[attachment file=118631]
It’s printed from Spectrum PLA stone age light on my Prusa MK2. I didn’t like the printed base so I cut it off from the model.
The base is made from a piece of oak, it has a recess cut into it where the 3d print is glued in.
[attachment file=118632]
The name plate is an engraved piece of brass.
[attachment file=118633]
This was my first time working with metal on the MPCNC, and the first time I did an engraving with ESTLCAM. I tried it with a 30° engraving bit at first, but that was completely dull after the first letter. Then I switched to a 60° V carving bit, which stayed sharp even after the entire name was engraved. I think I need to face the spoilboard again, it looks like the right side was a bit higher than the left side. Also I haven’t figured out all the engraving settings, in the 3rd “u” and the “C” there are small diamond shapes and I don’t know why ESTLCAM made them…
But I think overall it turned out great