New build - not square

Hi there

was hoping to get some advice, clearly from my pics there is a massive out of square issue. Has me stumped. New to mpcnc and new to forums.

25.4mm tube

PLA print on Artillery Sidewinder X1

cheers

 

[attachment file=117893] [attachment file=117894] [attachment file=117895] [attachment file=117896]

30F6FBA5-3CE9-4D4F-87A9-A07341FEB6B9.jpeg

4B44AE1E-3C07-4047-881C-AFA55665517A.jpeg

565AFC3F-8CEB-4A60-8D02-F0A6837BA231.jpeg

EB125569-82B3-4B4D-818C-AA481B1C538B.jpeg

The z assembly needs to be installed.

2 Likes

Same here friend. Calibrated printer and reprinted all gantry parts and got new and precise tubes. Still very much out of square. It’s said that we should finish the build and try to brake it in, and then retighten/loosen/reassemble. That’s my plan for the moment.

1 Like

Barry

Thanks, for the out of square photo z axis was installed. When z axis removed the squareness is nearly good. Install Z and things get ugly.

Brett

will try your advice and put it all together and see what gives. Maybe it will break in like you said.

Let me know how it turns out for you.

Brett

1 Like