Piper 1 3D printer

Inspired by MPCNC design I have made a 3D printer design based on conduit pipes and 608 ball bearings as linear motion system. The very first version of the printer was printed on MPCNC with 3D printing head. I am cutting print beds on MPCNC with the router head also.

[attachment file=53754]

(not the best picture :slight_smile: )

[attachment file=53755]

Full specs may be found at http:\piper3dprinters.com, and https://www.thingiverse.com/thing:2794632.

Alex that looks awesome how many did you make. I see several in the pic. Please post more pics.

Any videos of it running? More details please.

Are you going to make the files available?

Gary

Thank you. So far I built 4 but only the first one was printed on MPCNC :slight_smile: rest of them self-reproduced. So officially MPCNC is the father/mother of piper printers :slight_smile:

Sorry links did not go through first time.

Files are available at https://www.thingiverse.com/thing:2794632

Instructions on assembling Piper1 are at http:\piper3dprinters.com

Link to youtube video: https://youtu.be/HZq3jNRCkO4

IMG_2157.jpg

IMG_2156.jpg

IMG_2155.jpg

Love it! I have to keep telling myself I have enough 3d printers… my wife would kill me … then again if I hid it in the garage…

Neil

1 Like

@Neil, make it the same color, then just don’t let her see both at the same time.

1 Like

Neil, my wife was the same until I started printing “useful” things for the house. Started with a brush stand. But when I printed dowels for her new fancy shoes (she lost one of the dowels after the first walkout) I was free to make few more printers :slight_smile:

1 Like

My wife is on to my tricks… I get the eye roll when I give her the same ol line of ‘this is the same one I had last year, remember’ too many hobbies not enough places to hide ‘upgrades’…

 

Neil

Well you got on Hackaday, I am proud of you and to be any little part of it so I put you on the front page here as well.

Congrats and thanks!

1 Like

Ryan, Thank you for your support. Missed you at ERRF, it was a great event.

Wow! Look at that! Space to walk! :lol:

I really had a hard time deciding if I should go or not. Being just one guy running this little biz ERRF came at a bad time, I had other things that had to be done. Now that I know there is room there…plan ahead and next time for sure!

I heard that some people are planning to get 8 tables next year for one exposition so it should be more crowded :slight_smile:

They also thinking of moving the show to September-October rather than June. I think it is to involve their students in.

Great work on the piper design, Alex!

Do you have any pictures of prints made with piper that you might be able to upload? I have a ton of 1/2 conduit laying around and an Itopie that I am tempted to convert, but I am worried about ringing/ghosting/resonance in the prints from this machine due to the heavier mass of the carriages.

 

 

Hi Ubaldo,

This is what is coming out of Piper 1. You may also check interview to “Inside the mind of Matt” for more insides https://youtu.be/ybxNmI4ZSYw

Is this considered a good print?

I’m really just asking, I don’t want to be a dick.

Maybe some size comparisons, or specs like layer height etc. would help for perspective?

Next to 608 ball bearing. 0.4mm nozzle, o.2mm layer height 70 mm/s print speed, maybe a little too hot.

Original model https://www.thingiverse.com/thing:2631794

Might try slowing down a touch, that’s pretty fast even for a delta.

1 Like

Barry, you are right, slowing down should help. To be frank, when I printed that boat at ERRF I put Piper 1 to the edge.

Slowing down to 55 mm/s did help. (Blue is slower)

1 Like