Yes Mattercontrol is using Matterslice and Repetier is using slic3r.
This part came out fine. But so do most. until something im not seeing happens. I dont think it is any energy surge or loss as it is on a battery backup that would stop that.
Yes Mattercontrol is using Matterslice and Repetier is using slic3r.
This part came out fine. But so do most. until something im not seeing happens. I dont think it is any energy surge or loss as it is on a battery backup that would stop that.
So just a bit of follow up. I resized my machine down to a more realistic and manageable size. It is now 24x24 inches with the same 9.5 Z height. I also ran a second set of bars around the middle which seemed to help. The shifting, as best I can tell was from me printing too fast (around 50 mm/s) with a frame that wasn’t quite up to it. With these modifications and slowing down a little I am getting really good prints.
My next process will be getting this direct drive extruder off the bottom and putting a Bowden style extruder in to reduce that low end weight. So if anyone has a link to a good mount preferably with a fan please let me know!
Anyway thought I would touch base ad give you guys the newest news. Thanks for the help!