Printer configuration

I’ve been lurking here since I found the MPCNC on thingiverse (only been printing for ~6 months) and I think I have “learned” enough by reading here to start building my own. I plan on building it to about 2’ x 2’ working area which seems like a sweet spot for the size I want to be able to work with and store in the garage.

A question before I start printing parts; Is there a reason not to use a .6mm nozzle vs the .4mm that is used in the walkthrough?

Thanks in advance!

Welcome to the crew…and go for it. Large nozzle=faster print times.

1 Like