Rambo LCD 1.4

[TeacherTeglen]

Can somebody point me to the correct page where it tells me which cable from the LCD goes where on the Rambo 1.4? I feel like I’m taking crazy pills, but I can’t find it. All I know is that the red stripes go on the left side. /docs.v1engineering.com/electronics/ultimachine/#adding-an-lcd_1 site doesnt actually say how to connect it. help?

[barry99705 (Barry)]

https://docs.v1engineering.com/electronics/ultimachine/

Better pictures.

Rambo 1.4 and LCD issues

[attachment file=“RAMBo LCD Connection.jpg”] Same. At least for me, for the RAMBo 1.4 + Full Graphics LCD combo to work, you need to turn one end of each cable 180 degrees. I flipped the LCD-end of the cables. Now they point toward the bottom of the LCD instead of the top. [attachment file=60918] Amatuer-tip: Clip the notch on one end of your cables so you don’t have to force anything.[attachment file=60920] The clippers I use for Metal Earth models work well. [attachment file=60921] [IMG_…

[UndCon]

On the back of LCD, the ribbon cable nearest SD-Card is for SD, the other is for LCD.

If your display works when you power up it is correct, if not just swap cables around at either end.