Two Trees SKR V1.5 Turbo stepper motor jumpers position

Software / Firmware SKR Boards
1

Hi all,
I bought this board thinking it was just a copy of the BTT SKR V1.4 Turbo, but in the description for TMC UART mode you need supposedly to connect the center and right pin with a jumper instead of the left and center one as it is on the SKR V1.4 Turbo. Can someone tell me which is the correct position of the jumpers

IMG_20220102_155211
IMG_20220102_155211975×374 148 KB

2

IMG_20220102_155147
IMG_20220102_1551471000×1025 132 KB

3

Anybody?

4

I would like to, but I don’t know.

5

Looks like there is very little info available for direct support on the board. I would suggest trying their website. It looks like they have chat support.

Caveat Emptor!

6

Welp I didn’t find any info so I tried both positions and the jumpers should be on the left like the BTT SKR V1.4 Turbo